Tribit-FlyBuds-C1-Earbuds-Manual-d

Tribit FlyBuds C1 Earbuds Manual | Step-by-Step Guide 2021

In the world of technology, there are a large number of products, which can be used to improve our lives at home or for personal and recreational use. Among the many products that are currently available, we have the earbuds, and here we have talked about some of them, as well as the Kurdene S8. In this article, we are going to show you the user manual of one of these products, the Tribit FlyBuds C1, as well as the correct way to use them in this new Tribit FlyBuds C1 Earbuds Manual.

Tribit FlyBuds C1 Earbuds Manual | All You Need To Know About!

Tribit FlyBuds C1 Earbuds Manual – How to pair?

Connect the earbuds to a Bluetooth device

  • Step 1: Open the upper cover of the charging case and the earbuds will automatically enter the Bluetooth pairing mode, and the buds’ indicator lights will flash red and white alternately.
  • Step 2: Turn on the Bluetooth function in the Bluetooth device.
  • Step 3: Refresh the Bluetooth device listing.
  • Step 4: Select the paired audio device named “Tribit FlyBuds C1” to connect. After this, the indicator lights on the earbuds will go off after a successful pairing.

Connect the earbuds with other devices

  • Step 1: Disconnect the currently connected Bluetooth device, and then the earbuds will automatically enter the Bluetooth pairing mode.
  • Step 2: Put the left and right earbuds back into the charging case and keep the case open.
  • Step 3: Press and hold the button on the charging case for 5 seconds.
  • Step 4: After the 4 indicator lights of the charging case flash 3 times simultaneously, the earbuds will automatically enter the Bluetooth pairing mode.
  • Step 5: Pair the earbuds as explained in “Connect the earbuds to a Bluetooth device”.

Tribit FlyBuds C1 Earbuds Manual – How to charge the earbuds?

To charge the earbuds, all you have to do is put the buds in place in the charging case, and they will start charging automatically. They will be fully charged after 1.5 hours.

Tribit FlyBuds C1 Earbuds Manual – How to charge the case?

To charge the charging case, all you have to do is to plug one end of the USB cable into a 5V power supply, and the other end into the charging port on the charging case. After doing this, the indicator lights will flash during the charging process. It will be fully charged after 2 hours.

Tribit FlyBuds C1 Earbuds Manual - How to charge the case?

Tribit FlyBuds C1 Earbuds Manual – How to use? / Control instructions

  • Power on: Press and hold the physical button on any of the earbuds for 2 seconds (when music is not playing).
  • Power off: Press and hold the physical button on any of the earbuds for 6 seconds (when music is not playing).
  • Play or pause music: Click the physical button on any of the earbuds.
  • Previous track: Double-click the physical button on the left earbud.
  • Next track: Double-click the physical button on the right earbud.
  • Answer or end a call: Click the physical button on any of the earbuds.
  • Reject an incoming call: Double-click the physical button on any of the earbuds.
  • Increase the volume: Press and hold the physical button on the right earbud (when music is playing).
  • Decrease the volume: Press and hold the physical button on the left earbud (when music is playing).
  • Activate the voice assistant: Triple-click the physical button on any of the earbuds.

Tribit FlyBuds C1 Earbuds Manual – How to wear?

  • Step 1: Make sure to choose the ear tip that best suits your ear, so that placing the earbuds is easier and more comfortable.
  • Step 2: Insert the earbud so the ear tip gently rests at the opening of your ear canal.
  • Step 3: Slightly rotate the earbud back until the ear tip creates a comfortable seal at your ear canal.
  • Step 4: Having placed it in the ear opening, make sure that the earbud body is positioned vertically.
  • Step 5: Repeat steps 1 to 4 to insert the other earbud.

Tribit FlyBuds C1 Earbuds Manual – LED light indication

Earbud’s LED indicators

  • Charging the earbuds: LED light stays on.
  • Earbuds pairing to the device: Red and white LED lights flash slowly.
  • Successful connection: LED light turns off.
  • Earbuds low battery: Red LED light flashes slowly.

Charging case’s LED indicators

  • 100% of battery: 4 LED lights are on.
  • 75% of battery: 3 LED lights are on.
  • 50% of battery: 2 LED lights are on.
  • 25% of battery: 1 LED light is on.
  • 0% of battery: All-LED lights are off.

LED light indication

Q&A

What’s the Tribit FlyBuds C1 IP rating?

The IP rating of the Tribit FlyBuds C1 is IPX8, so they can be protected against submersion to a depth, specified by the manufacturer, which typically goes up to 3 meters.

Is there any Tribit FlyBuds C1 app?

No, there isn’t, however built-in equalizers (like Media Monkey) can improve the bass.

Are the Tribit FlyBuds C1 waterproof?

Yes, the Tribit FlyBuds C1 are waterproof due to their IPX8 rating.

Tribit FlyBuds C1 Earbuds Manual – Warnings

  1. Never dismantle or refit the product to avoid malfunction or fire hazards.
  2. Keep away from corrosive liquids to avoid damages to the product.
  3. Keep away from extreme ambient temperatures below -10C° or above 60°C.
  4. Keep away from children and pets.
  5. Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
  6. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
  7. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.

We hope you now know how to operate the earphone from the above Tribit FlyBuds C1 Earbuds Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

Show Comments (0)

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.