Tronsmart Apollo Air+ Manual | Step-by-step Guide 2021

The Tronsmart Apollo Air+ have the Qualcomm QCC3046 chipset, the IPX5 sweat and water-proof certification, Bluetooth 5.2, aptX, AAC, and SBC codecs, ANC, 10mm dynamic driver, around 5.5 hours listening on a full charge, and up to 20 hours of music playback with the charging case, and much more. Learn how to use them with this new Tronsmart Apollo Air+ Manual.

Tronsmart Apollo Air+ Manual | Everything You Need To Know!

Tronsmart Apollo Air+ Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the multifunction touch button on the charging case for 2 seconds. When a red and blue light starts flashing in the earbuds, the earbuds will be ready to pair.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Tronsmart Apollo Air+”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 7: Press and hold the multifunction touch button on the charging case for 2 seconds. When a red and blue light starts flashing in the earbuds, the earbuds will be ready to pair.

Step 8: Select “Tronsmart Apollo Air+”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Tronsmart Apollo Air+ Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Tronsmart Apollo Air+ Manual | How to Turn On and Off?

Turn on

Automatically: Take the earbuds out of the charging case. After that, they will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for 3 seconds. They will turn on.

Turn off

Automatically: Place the earbuds inside of the charging case. After that, the earbuds will turn off automatically.

Manually: Press the multifunction touch button on both earbuds two times, and then press and hold the button on both earbuds for 3 seconds. They will turn off.

Tronsmart Apollo Air+ Manual | How to Activate the ANC?

To activate or deactivate the ANC feature in the Tronsmart Apollo Air+, all you have to do is to press the multifunction touch button on any of the earbuds three times.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Turn the volume up: Press the multifunction touch button on the right earbud one time.
• Turn the volume down: Press the multifunction touch button on the left earbud one time.
• Play the next song: Press and hold the multifunction touch button on the right earbud for 2 seconds.
• Play the previous song: Press and hold the multifunction touch button on the left earbud for 2 seconds.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times when an incoming call.
• End a call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds one time and then press and hold for 2 seconds.

Tronsmart Apollo Air+ Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Tronsmart Apollo Air+ Manual | How to Reset?

Step 1: Unpair the earbuds from any paired devices.

Step 2: Open the lid of the charging case.

Step 3: Take both earbuds out of the charging case.

Step 4: Press the multifunction touch button on both earbuds four times, and then press and hold the button on both earbuds for 5 seconds.

Step 5: After that, the resetting will be done.

Tronsmart Apollo Air+ Manual | LED Light Status

Earbuds

• Red and blue light flashing: Earbuds ready to pair.
• Red light on: Earbuds charging.
• Red light off: Earbuds fully charged.
• Red and blue light flashing three times and pause: Earbuds resetting.
• Red light flashing: Earbuds have low battery.

Charging case

• Blue light flashing three times: Case has 11% to 100% of battery.
• Red light flashing three times: Case has 1% to 10% of battery.
• Red light on: Case charging.
• Red light off: Case fully charged.

A Guide To Tronsmart Apollo Air+ APP

The Tronsmart Apollo Air+ can be used with an application, called Tronsmart. This application is available for iOS and Android devices. 

• First page: After entering the application and connecting to the earbuds, on the first page we will get the percentage of the battery of each earbud.
• Second page: On the second page, there is the equalizer, where the user can choose between different types of music, such as Deep Bass, 3D, Classical, Rock and more.
• Third page: On the third page, not only will you be able to see the controls that are available in the earbuds, but you will also be able to modify them as desired.

• 

• 

• 

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Tronsmart Apollo Air+ eabuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Tronsmart Apollo Air+ Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Tronsmart company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!