Truke Buds S2 Lite Manual | How To Pair These Earbuds?

The Truke Buds S2 Lite earbuds come with specs such as a total battery life of 48 hours using the charging case, Gaming mode with 55ms ultra-low-latency, AC and SBC codec support, Bluetooth 5.1, 10mm Titanium speakers, quad MEMS MIC with ENC, the IPX4 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this manual!

Truke Buds S2 Lite Manual | All You Have To Know

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically.

Manually: Press and hold the multifunction touch area on both earbuds for about 3 seconds, until a green and white light will start flashing in both earbuds.

Turn Off

Automatically: Place the earbuds into the charging case and closet its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch area on any of the earbuds for about 5 seconds. If the earbuds are linked, powering off one earbud will power off both of them.

How To Pair The Earbuds?

To Android Or iOS Devices

Step 1: Open the lid of the charging case. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically.

NOTE: If the earbuds don’t power on automatically, then press and hold the multifunction touch area on both earbuds for about 3 seconds, until a green and white light will start flashing in both of them.

When said green and white light only flashes in one of the earbuds, it means that they will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Select the trüke Buds S2 Lite earbuds. If a password is needed, type “0000”. After that, the lights will stop flashing, and the pairing will be done.

To Windows (PC)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically.

NOTE: If the earbuds don’t power on automatically, then press and hold the multifunction touch area on both earbuds for about 3 seconds, until a green and white light will start flashing in both of them.

When said green and white light only flashes in one of the earbuds, it means that they will be ready to pair with any device.

Step 7: Select the trüke Buds S2 Lite earbuds. If a password is needed, type “0000”. After that, the lights will stop flashing, and the pairing will be done.

How To Control These Earbuds? – Stereo Mode

• Play or pause the music: Press the multifunction touch area on any of the earbuds one time.
• Play the next song: Press and hold the multifunction touch area on the right earbud for about 2 seconds.
• Play the previous song: Press and hold the multifunction touch area on the left earbud for about 2 seconds.
• Answer an incoming call: Press the multifunction touch area on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch area on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the multifunction touch area on the left earbud three times.
• Activate the gaming mode: Press the multifunction touch area on the right earbud three times.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port. It will start charging automatically.

How To Reset These Earbuds?

Step 1: Disconnect the earbuds from the connected device.

Step 2: Open the lid of the charging case. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically.

Step 3: Take the earbuds out of the charging case.

Step 4: Press the multifunction touch area on both earbuds 4 times.

Step 5: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Step 6: Open the lid of the charging case. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically. After that, the process will be done.

What Do The Lights Mean?

Earbuds

• A green and white light starts flashing in both earbuds: The earbuds turn on.
• A green and white light only flashes in one of the earbuds: The earbuds will be ready to pair with any device.
• The lights flashing on the earbud turn off: The earbuds are now connected.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Truke Buds S2 Lite manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.