UGREEN HiTune H3 Manual | Step-by-step Guide 2022

The UGREEN HiTune H3 have a low latency of 70ms, an Ai noise reduction algorithm digital processor that optimizes the audio performance for loudness and clarity, a 12mm dynamic driver, the IPX5 water and sweat-proof certification, around 6 hours of playtime, a total battery life of 25 hours, Bluetooth 5.2 with aptX, AAC, and SBC codecs, and much more. Learn how to use them with this new UGREEN HiTune H3 Manual.

UGREEN HiTune H3 Manual | Everything You Need To Know!

UGREEN HiTune H3 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1:  Open the lid of the charging case. After that, a blue light will turn on for 1 second, and the earbuds will turn on automatically.

If they are not ready to pair, press and hold the multifunction touch button on the charging case for 3 seconds. After that, a light will start flashing, and the earbuds will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “UGREEN HiTune H3”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 5: Open the lid of the charging case. After that, a blue light will turn on for 1 second, and the earbuds will turn on automatically.

If they are not ready to pair, press and hold the multifunction touch button on the charging case for 3 seconds. After that, a white light will start flashing, and the earbuds will be ready to pair to any device.

Step 6: Select “UGREEN HiTune H3”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

UGREEN HiTune H3 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

UGREEN HiTune H3 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, a blue light will turn on for 1 second, and the earbuds will turn on automatically.

Turn off: Put the earbuds into the charging case and close its lid. After that, a white light will turn on for 1 second, and the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the next song: Press the multifunction touch button on the right earbud three times.
• Play the previous song: Press the multifunction touch button on the left earbud three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
• Activate the voice assistant: Press and hold the multifunction touch button on the left earbud for 2 seconds.

UGREEN HiTune H3 Manual | How to Activate Gaming Mode?

To activate or deactivate the gaming mode in the UGREEN HiTune H3, all you have to do is to press and hold the multifunction touch button on any of the earbuds for 3 seconds.

UGREEN HiTune H3 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the UGREEN HiTune H3, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

UGREEN HiTune H3 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

UGREEN HiTune H3 Manual | LED Light Status

Earbuds

• Blue light on for 1 second: Earbuds turn on.
• White light on for 1 second: Earbuds turn off.
• White flashing three times: Earbuds resetting.

Charging case

• Red light flashing quickly: Case has less than 5% of battery.
• Red light flashing slowly: Case has between 5% and 30% of battery.
• White light flashing slowly: Case has at least 30% of battery.
• All lights turn off: Case/earbuds fully charged.
• Lights flashing: Earbuds charging.
• White light flashing three times: Earbuds resetting.

UGREEN HiTune H3 Manual | How to Reset?

Step 1: Disconnect the earbuds from any connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button in the back of the charging case for about 10 seconds. After that, a white light will turn on and start flashing three times.

Step 4: After that, the resetting will be done.

UGREEN HiTune H3 Manual | Earbuds Voice Prompts Status

• Earbuds turn on: “Power on”.
• Earbuds pairing: “Pairing”.
• Earbuds connect to a Bluetooth device: “Bluetooth connected”.
• Earbuds disconnect from a Bluetooth device: “Bluetooth disconnected”.
• Earbuds have low battery: “Low battery”.
• EQ switch: “Normal mode/Gaming mode”.
• Earbuds turn off: “Power off”.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

UGREEN HiTune H3 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above UGREEN HiTune H3 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the UGREEN company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!