UGREEN HiTune T1 Manual | Instructions & Troubleshooting

The UGREEN HiTune T1 have a 6mm dynamic driver, the IPX5 water and sweat-proof certification, around 5.5 hours of playtime, a total battery life of 24 hours, Bluetooth 5.0 with aptX, AAC, and SBC codecs, and much more. Learn how to use them with this new UGREEN HiTune T1 Manual.

UGREEN HiTune T1 Manual | Everything You Need To Know!

UGREEN HiTune T1 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. If they don’t turn on, press and hold the multifunction touch button on any of the earbuds for 3 seconds. After that, a blue light will turn on for 1 second, and the earbuds will turn on.

When a blue and white light starts flashing, they will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “UGREEN HiTune T1”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. If they don’t turn on, press and hold the multifunction touch button on any of the earbuds for 3 seconds. After that, a blue light will turn on for 1 second, and the earbuds will turn on.

When a blue and white light starts flashing, they will be ready to pair to any device.

Step 6: Select “UGREEN HiTune T1”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

UGREEN HiTune T1 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

UGREEN HiTune T1 Manual | How to Turn On and Off?

Turn on

Automatically: Open the lid of the charging case. After that, a blue light will turn on for 1 second, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on any of the earbuds for 3 seconds. After that, a blue light will turn on for 1 second, and the earbuds will turn on.

Turn off

Automatically: Put the earbuds into the charging case and close its lid. After that, a white light will turn on for 1 second, and the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on any of the earbuds for 6 seconds. After that, a white light will turn on for 1 second, and the earbuds will turn off.

How to Control? / How to Operate? – Instructions

• Play the next song: Press the multifunction touch button on the right earbud one time.
• Play the next song: Press the multifunction touch button on the right earbud three times.
• Play the previous song: Press the multifunction touch button on the left earbud three times.
• Turn the volume up: Press the multifunction touch button on the right earbud two times.
• Turn the volume down: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
• Switch from normal mode to SuperBass mode: Press and hold the multifunction touch button on the right earbud for 2 seconds.
• Activate the voice assistant: Press and hold the multifunction touch button on the left earbud for 2 seconds.

UGREEN HiTune T1 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the UGREEN HiTune T1, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

UGREEN HiTune T1 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

UGREEN HiTune T1 Manual | How to Reset?

Step 1: Disconnect the earbuds from any connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button in the back of the charging case for a couple of seconds. When a blue and white light turns on and flashes 3 times, release the button.

Step 4: After that, the resetting will be done.

UGREEN HiTune T1 Manual | LED Light Status

Earbuds

• Blue and white light flashing: Earbuds ready to pair to any device.
• Blue light on for 1 second: Earbuds turn on.
• White light on for 1 second: Earbuds turn off.
• Blue and white light flashing 3 times when resetting: Earbuds resetting.

Charging case

• White light flashing on while charging: Earbuds charging.
• White light flashing turns off while charging: Earbuds fully charged.
• White light on while charging: Case charging.
• White light turns off while charging: Case fully charged.
• Red light flashing for 3 seconds: Case has less than 30% of battery.

UGREEN HiTune T1 Manual | Earbuds Voice Prompts Status

• Earbuds turn on: “Power on”.
• Earbuds pairing: “Pairing”.
• Earbuds connect to a Bluetooth device: “Bluetooth connected”.
• Voice assistant activating: “Dong”.
• Earbuds disconnect from a Bluetooth device: “Bluetooth disconnected”.
• Earbuds have low battery: “Low battery”.
• Switch from normal mode to SuperBass mode: “Normal mode/SuperBass mode”.
• Earbuds turn off: “Power off”.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

UGREEN HiTune T1 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above UGREEN HiTune T1 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the UGREEN company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!