UGREEN-HiTune-T2-Manual-7

UGREEN HiTune T2 Manual | Pairing & Troubleshooting 2022

The UGREEN HiTune T2 have a special gaming mode, 4 MRMs microphones, a latency of 60ms, 14.2mm dynamic driver, the IPX5 water and sweat-proof certification, around 4 hours of playtime, a total battery life of 20 hours, Bluetooth 5.2 with aptX, AAC, and SBC codecs, and much more. Learn how to use them with this new UGREEN HiTune T2 Manual.

UGREEN HiTune T2 Manual | Everything You Need To Know!

UGREEN HiTune T2 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1:  Take the earbuds out of the charging case. After that, they will turn on automatically, a blue light will turn on for 1 second, and will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “UGREEN HiTune T2”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 5: Take the earbuds out of the charging case. After that, they will turn on automatically, a blue light will turn on for 1 second, and will be ready to pair to any device.

Step 6: Select “UGREEN HiTune T2”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

UGREEN-HiTune-T2-Manual-1
Credits: Pokde.Net

UGREEN HiTune T2 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

UGREEN HiTune T2 Manual | How to Turn On and Off?

Turn on

Automatically: Take the earbuds out of the charging case. After that, a blue light will turn on for 1 second, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on any of the earbuds for 2 seconds. After that, a blue light will turn on for 1 second, and the earbuds will turn on.

Turn off

Automatically: Put the earbuds into the charging case and close its lid. After that, a white light will turn on for 1 second, and the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on any of the earbuds for 6 seconds. After that, a white light will turn on for 1 second, and the earbuds will turn off.

UGREEN-HiTune-T2-Manual-2

How to Control? / How to Operate? – Instructions

  • Play the next song: Press the multifunction touch button on the right earbud one time.
  • Play the next song: Press the multifunction touch button on the right earbud three times.
  • Play the previous song: Press the multifunction touch button on the left earbud three times.
  • Turn the volume up: Press the multifunction touch button on the right earbud two times.
  • Turn the volume down: Press the multifunction touch button on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
  • Activate the voice assistant: Press and hold the multifunction touch button on the left earbud for 2 seconds.

UGREEN HiTune T2 Manual | How to Activate Gaming Mode?

To activate or deactivate the gaming mode in the UGREEN HiTune T2, all you have to do is to press the multifunction touch button on any of the earbuds four times.

UGREEN-HiTune-T2-Manual-3

UGREEN HiTune T2 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the UGREEN HiTune T2, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

UGREEN HiTune T2 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

UGREEN-HiTune-T2-Manual-4
Credits: RadioQTH

UGREEN HiTune T2 Manual | LED Light Status

Earbuds

  • Blue light on for 1 second: Earbuds turn on.
  • White light on for 1 second: Earbuds turn off.
  • Blue and white light flashing alternately: Earbuds ready to pair to any device.

Charging case

  • White light on: Case charging.
  • White light turns off: Case fully charged.
  • Red light flashing for 3 seconds: Case has low battery.
  • White light flashing: Earbuds charging.
  • White light turns off: Earbuds fully charged.
UGREEN-HiTune-T2-Manual-5
Credits: Nerd Techy

UGREEN HiTune T2 Manual | How to Reset?

Step 1: Disconnect the earbuds from any connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button in the back of the charging case for about 10 seconds. After that, the three light in the charging case will start blinking.

Step 4: After that, the resetting will be done.

UGREEN HiTune T2 Manual | Earbuds Voice Prompts Status

  • Earbuds turn on: “Power on”.
  • Earbuds pairing: “Pairing”.
  • Earbuds connect to a Bluetooth device: “Bluetooth connected”.
  • Earbuds disconnect from a Bluetooth device: “Bluetooth disconnected”.
  • Earbuds have low battery: “Low battery”.
  • EQ switch: “Normal mode/Gaming mode”.
  • Earbuds turn off: “Power off”.
UGREEN-HiTune-T2-Manual-6
Credits: Notebookcheck.org

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

UGREEN HiTune T2 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

UGREEN-HiTune-T2-Manual-7
Credits: Top2gadget

FAQs

Are UGREEN HiTune T2 waterproof?

The UGREEN HiTune T2 have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle.

Does UGREEN HiTune T2 have a microphone?

Yes, the UGREEN HiTune T2 have integrated microphones.

What is the latency of UGREEN HiTune T2?

The UGREEN HiTune T2 have a latency of 60ms.

Do UGREEN HiTune T2 have low latency/gaming mode?

Yes, the UGREEN HiTune T2 have a low latency/gaming mode.

How to know when UGREEN HiTune T2 are fully charged?

The earbuds take about 1.5 hour to charge, so after that time, they should be fully charged.

Can UGREEN HiTune T2 connect to PC and Laptop?

Yes, the UGREEN HiTune T2 can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earphone from the above UGREEN HiTune T2 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the UGREEN company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!