UiiSii TWS60 Manual | Step-by-step Pairing & Troubleshooting

The UiiSii TWS60 comes with a Bluetooth 5.0, a playtime of 5 hours, a 6mm driver size, IPX5 sweat and water-proof certification, aptX, AAC, and SBC codecs, and much more. Learn how to use them with this new UiiSii TWS60 Manual.

UiiSii TWS60 Manual | Everything You Need To Know!

UiiSii TWS60 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take both earbuds out of the charging case. They will turn on, and a blue light will start flashing, and they will pair to each other. When a red and blue light starts flashing alternately on the left earbud, they will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “UiiSii TWS60”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take both earbuds out of the charging case. They will turn on, and a blue light will start flashing, and they will pair to each other. When a red and blue light starts flashing alternately on the left earbud, they will be ready to pair to any device.

Step 7: Select “UiiSii TWS60”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

UiiSii TWS60 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit.

UiiSii TWS60 Manual | How to Turn On and Off?

Automatically

Turn on: Take both earbuds out of the charging case. A blue and red light will be on for 1 second, and they will turn on automatically.

Turn off: Place the earbuds inside of the charging case. A red light will be on for 1 second, and they will turn off automatically.

Manually

Turn on: Press and hold the multifunction touch button on both earbuds for about 3 seconds. A blue and red light will be on for 1 second, and they will turn on.

Turn off: Press and hold the multifunction touch button on both earbuds for about 3 seconds. A red light will be on for 1 second, and they will turn off.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds.

UiiSii TWS60 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

UiiSii TWS60 Manual | How to Reset?

Step 1: Delete all “UiiSii TWS60” records on the connected device.

Step 2: Turn the earbuds off by pressing and holding the multifunction touch button on both earbuds for about 3 seconds.

Step 3: Press and hold the multifunction touch button in both earbuds, until a blue and white light flashes in both earbuds.

Step 4: After that, the resetting will be done.

UiiSii TWS60 Manual | LED Light Status

Earbuds

• Blue and red light on for 1 second: Earbuds turn on.
• Red light on for 1 second: Earbuds turn off.
• Red light on: Earbuds charging.
• Red light off: Earbuds fully charged.
• Red light on while not charging: Earbuds have low battery.
• Blue light flashing: Earbuds paired to each other.
• Red and blue light flashing alternately on the left earbud: Earbuds ready to pair to any device.
• Blue and white light flashing in both earbuds: Earbuds resetting.

Charging case

• One light on: 0% to 25% of battery.
• Two lights on: 25% to 50% of battery.
• Three lights on: 50% to 75% of battery.
• Four lights on: 75% to 100% of battery.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

UiiSii TWS60 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above UiiSii TWS60 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the UiiSii company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!