Whizzer-B6-Manual-6

Whizzer B6 Manual | Step-by-step Pairing & Troubleshooting

Aliexpress banner

The Whizzer B6 comes with Bluetooth 5.0 + EDR protocol, the amazing IPX7 waterproof certification, AptX /AAC, the Qualcomm QCC3020 chip, a battery life of about 8 hours, and more. Learn how to use them with this new Whizzer B6 Manual.

Whizzer B6 Manual | This Is All You Need To Know!

Whizzer B6 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the charging case and take the earbuds out. After that, a green light will flash three times, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds.

When a green and white light starts flashing on both earbuds, they will be ready to pair with any device.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “B6-L” or “B6-R”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the charging case and take the earbuds out. After that, a green light will flash three times, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds.

When a green and white light starts flashing on both earbuds, they will be ready to pair with any device.

Step 7: Select “B6-L” or “B6-R”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Whizzer-B6-Manual-1
Credits: ixbt.com

Whizzer B6 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Whizzer B6 Manual | How to Turn On And Off?

Turn on: Open the charging case and take the earbuds out. After that, a green light will flash three times, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Play the next song: Press the multifunction touch button on the right earbud three times.
  • Turn the volume up: Press and hold the multifunction touch button on the left earbud for about 2 seconds.
  • Turn the volume down: Press and hold the multifunction touch button on the right earbud for about 2 seconds.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds two times.

Whizzer B6 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Whizzer B6, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Whizzer-B6-Manual-3
Credits: ixbt.com

Whizzer B6 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. Also, it can be charged using a wireless charger by placing the case on top of it.

Whizzer B6 Manual | LED Light Status

Earbuds

  • A green light flashes three times: The earbuds turn on.
  • A green and white light starts flashing on both earbuds: The earbuds will be ready to pair with any device.
  • A green light turns off and a white light starts flashing: The earbuds are resetting.
  • A green light flashes in one of the earbuds and a green and white light flashes on the other earbud: The resetting is done.

Charging case

  • One light on: The case has a low battery.
  • Two lights on: The case has half of its battery.
  • Two lights on: The case is fully charged.
  • A green light while charging: The case is charging.
  • Said light turns off: The case is fully charged.
  • A white light while charging with the earbuds inside: The earbuds are charging.
  • Said light turns off with the earbuds inside: The earbuds are fully charged.
  • One light on with the earbuds inside: The earbuds have a low battery.
  • Two lights on with the earbuds inside: The earbuds have half of their battery.
  • Two lights on with the earbuds inside: The earbuds are fully charged.
Whizzer-B6-Manual-4
Credits: ixbt.com

Whizzer B6 Manual | How to Reset?

Step 1: Delete all “B6-L” or “B6-R” pairing records on the connected device.

Step 2: Open the charging case and take the earbuds out. After that, a green light will flash one time, and the earbuds will turn on automatically.

Step 3: Press the multifunction touch button in one of the earbuds 5 times.

Step 4: Press and hold the multifunction touch button in one of the earbuds for about 5 seconds, until the green light turns off and a white light starts flashing.

Step 5: Repeat steps 3 and 4 with the other earbud, and when a green light flashes in one of the earbuds and a green and white light flashes on the other earbud, the resetting will be done.

Whizzer-B6-Manual-5
Credits: ixbt.com

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Whizzer-B6-Manual-6
Credits: ixbt.com

FAQs

Are Whizzer B6 waterproof?

Yes, the Whizzer B6 are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but they are also protected against the effects of immersion.

Does Whizzer B6 have a microphone?

Yes, the Whizzer B6 have integrated microphones.

Does Whizzer B6 have a low latency/gaming mode?

No, the Whizzer B6 don’t have a low latency/gaming mode.

Can Whizzer B6 connect to PC and Laptop?

Yes, the Whizzer B6 can connect to PCs, laptops, and tablets.

Are Whizzer B6 noise canceling?

No! These earbuds don’t come with noise cancellation technology.

How to know when Whizzer B6 are fully charged?

When the earbuds are charging, a white light is on the charging case. When fully charged, the light turns off.

We hope you now know how to operate the earphone from the above Whizzer B6 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.