Xiaomi-Mi-Air-2-SE-Manual-16

Xiaomi Mi Air 2 SE Manual | Step-by-step Guide 2022

Aliexpress banner

The Xiaomi Mi Air 2 SE come with a 14.2mm composite diaphragm moving coil, Bluetooth 5.0, a battery life of about 5 hours + 15 using the charging case, a working distance of 10 meters, the IPX4 certification, and more. Learn how to use them with this new Xiaomi Mi Air 2 SE Manual.

Xiaomi Mi Air 2 SE Manual | Pairing & Charging Instructions

Xiaomi Mi Air 2 SE Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Press and hold the multifunction touch button on both earbuds for about 3 seconds, until a white light starts flashing, meaning that the earbuds are ready to pair with any device.

Step 3: Turn on the Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select “Xiaomi Mi Air 2 SE”. If a password is needed, type “0000”.

Step 6: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 7: Press and hold the multifunction touch button on both earbuds for about 3 seconds, until a white light starts flashing, meaning that the earbuds are ready to pair with any device.

Step 8: Select “Xiaomi Mi Air 2 SE”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Xiaomi-Mi-Air-2-SE-Manual-1
Credits: manuals.plus

Xiaomi Mi Air 2 SE Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Xiaomi Mi Air 2 SE Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Xiaomi-Mi-Air-2-SE-Manual-12

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on the right earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Activate the voice assistant: Press the multifunction touch button on the left earbud two times.
Xiaomi-Mi-Air-2-SE-Manual-3
Credits: manuals.plus

Xiaomi Mi Air 2 SE Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Xiaomi Mi Air 2 SE, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Xiaomi Mi Air 2 SE Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Xiaomi-Mi-Air-2-SE-Manual-14
Credits: manuals.plus

Xiaomi Mi Air 2 SE Manual | LED Light Status

Earbuds

  • A white light flashing: The earbuds are ready to pair with any device.
  • A white light turns on while resetting: The earbuds are resetting.

Charging case

  • A white light on while charging: The case is charging.
  • Said white light turns off while charging: The case is fully charged.
  • A light on for 5 seconds with the earbuds inside: The case has enough battery.
  • A white light flashing: The case has a low battery.

Xiaomi Mi Air 2 SE Manual | How to Reset?

Step 1: Delete all “Xiaomi Mi Air 2 SE” information from the connected device.

Step 2: Place both earbuds into the charging case and keep its lid open.

Step 3: Press and hold the multifunction touch button on both earbuds for about 7 seconds, until a white light turns on in the earbuds. After that, the resetting will be done.

Xiaomi-Mi-Air-2-SE-Manual-15
Credits: manuals.plus

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Xiaomi Mi Air 2 SE earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Xiaomi-Mi-Air-2-SE-Manual-16

FAQs

Are Xiaomi Mi Air 2 SE waterproof?

No, the Xiaomi Mi Air 2 SE are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Does Xiaomi Mi Air 2 SE have a microphone?

Yes, the Xiaomi Mi Air 2 SE have integrated microphones.

Do Xiaomi Mi Air 2 SE have low latency/gaming mode?

No, the Xiaomi Mi Air 2 SE don’t have a low latency/gaming mode.

Can Xiaomi Mi Air 2 SE connect to PC and Laptop?

Yes, the Xiaomi Mi Air 2 SE can connect to PCs, laptops, and tablets.

Are Xiaomi Mi Air 2 SE noise cancelling?

No! These earbuds don’t come with noise cancellation technology.

We hope you now know how to operate the earphone from the above Xiaomi Mi Air 2 SE Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.