Xiaomi Redmi Buds 3 Pro Manual | Step-by-step Guide 2021

The Xiaomi Redmi Buds 3 Pro have up to 28 hours of standby time, the IPX4 waterproof certification, up to 6 hours of music playback with a fully charged battery, Bluetooth 5.0 with aptX, AAC, and SBC codecs, and much more. Learn how to use them with this new Xiaomi Redmi Buds 3 Pro Manual.

Xiaomi Redmi Buds 3 Pro Manual | Everything You Need To Know!

Xiaomi Redmi Buds 3 Pro Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the multifunction touch button on both earbuds for about 2 seconds. When a white light starts flashing on both earbuds, they will be ready to pair to any device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Redmi Buds 3 Pro”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 7: Press and hold the multifunction touch button on both earbuds for about 2 seconds. When a white light starts flashing on both earbuds, they will be ready to pair to any device.

Step 8: Select “Redmi Buds 3 Pro”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Xiaomi Redmi Buds 3 Pro Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Xiaomi Redmi Buds 3 Pro Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Press the multifunction touch button on any of the earbuds three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds three times.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds three times.

Xiaomi Redmi Buds 3 Pro Manual | How to Activate ANC?

To turn on and off the ANC mode in the Xiaomi Redmi Buds 3 Pro, all you have to do is to press and hold the multifunction touch button on any of the earbuds.

Xiaomi Redmi Buds 3 Pro Manual | How to Activate Mono Mode?

To activate the mono mode in the Xiaomi Redmi Buds 3 Pro, all you have to do is to pair the earbuds with the desired device and take one of the earbuds out of the charging case. It can be used alone.

Xiaomi Redmi Buds 3 Pro Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Xiaomi Redmi Buds 3 Pro Manual | LED Light Status

Earbuds

• White light flashing: Earbuds ready to pair to any device.
• White light on: Earbuds charging.
• White light off: Earbuds fully charged.
• White light on while resetting: Earbuds resetting.
• White light flashing while resetting: Earbuds resetting.

Charging case

• White light flashing: Case have low battery.
• White light on for about 5 seconds: Case fully charged.
• White light on: Case charging.

Xiaomi Redmi Buds 3 Pro Manual | How to Reset?

Step 1: Place the earbuds into the charging case.

Step 2: Press and hold the multifunction touch button on both earbuds for at least 10 seconds, until a white light turns on.

Step 3: Clear the pairing information of the device to pair.

Step 4: After that, a light on the earbuds will start flashing, and the resetting will be done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Xiaomi Redmi Buds 3 Pro earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Xiaomi Redmi Buds 3 Pro Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Xiaomi company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!