YAQ T12 Manual | Step-by-step User Guide

The YAQ T12 earbuds come with specs such as the dust and sweat-proof IPX5 certification, Bluetooth 5.3, built-in microphones and one 13mm driver on each earbud, 10 of working connection range without obstacles, a speaker frequency range of 20Hz to 20kHz, 6 to 8 hours of battery life, and much more. Learn how to use these earbuds using this YAQ T12 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

YAQ T12 Specs Sheet

Model	YAQ T12
Weight	Earbuds and charging case: Around 40 grams
Waterproof/IP ratings	IPX5
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Driver	13mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: About 6 to 8 hours Charging case: About 34 to 32 hours
Charging Time	Earbuds: Around 1 hour Charging case: About 2 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistant
Accessories	Charging case, USB cable, user manual
Price	Around 80 USD

YAQ T12 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.

YAQ T12 Manual | Pairing & Charging Guide

How To Pair The Earbuds? – Dual Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on, pairing” voice prompt will sound, and the earbuds will turn on automatically.

A green light will start flashing every 2 seconds on the master earbud, meaning that the earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the T12 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on, pairing” voice prompt will sound, and the earbuds will turn on automatically.

A green light will start flashing every 2 seconds on the master earbud, meaning that the earbuds will now be ready to pair with any device.

Step 7: Select the T12 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

How To Pair The Earbuds? – Mono Mode

Step 1: Take only one of the earbuds out of the charging case. It will enter pairing mode.

Step 2: Search for a new device.

Step 3: Select the T12 earbud. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on, pairing” voice prompt will sound, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 3 seconds. After that, a green light will flash, the “Power on, pairing” voice prompt will sound, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, a green light will flash, the “Power off” voice prompt will sound, and the earbuds will turn off.

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the upper part of the body of the earbuds.

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Turn the volume up: Press and hold the multifunction touch button on the right earbud.
• Turn the volume down: Press and hold the multifunction touch button on the left earbud.
• Play the next song: While listening to music, press the multifunction touch button on the right earbud two times.
• Play the previous song: While listening to music, press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds
• three times.

How To Reset And Re-Pair These Earbuds?

Step 1: Take the earbuds out of the case.

Step 2: Press the multifunction touch button on both earbuds four times. The earbuds will turn off.

This will reset the earbuds.

Step 3: Place the earbuds into the case and wait for about 20 seconds.

Step 4: Delete the T12 earbuds from the devices’ Bluetooth list.

Step 5: Turn off Bluetooth.

Step 6: Turn on Bluetooth.

Step 7: Search for a new device.

Step 8: Open the lid of the charging case and take the earbuds out. After that, the “Power on, pairing” voice prompt will sound, and the earbuds will turn on automatically.

A green light will start flashing every 2 seconds on the master earbud, meaning that the earbuds will now be ready to pair with any device.

Step 9: Select the T12 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A green light flashes: The earbuds turn on/off.
• A green light flashes every 2 seconds on the master earbud: The earbuds will now be ready to pair with any device.
• A green light on for 15 seconds while on the charging case: The earbuds are charging.

Charging Case

• 0 to 99 appears on the display while charging: The case is charging.
• A 100 appears on the display while charging: The case is fully charged.
• Flashing down and up design with the earbuds inside: The earbuds are charging.
• No flashing design with the earbuds inside: The earbuds are fully charged.

The Earbuds’ Voice Prompts

• Power on, pairing: The earbuds are on and ready to pair.
• Power off: The earbuds turn off.
• Connected: The earbuds are connected.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above YAQ T12 manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.