ZVOLTZ-Pro-Wireless-Earbuds-Manual-6

ZVOLTZ Pro Wireless Earbuds Manual | In-depth Guide 2022

The ZVOLTZ Pro Wireless Earbuds comes with a battery life of around 4 hours and an amazing 80 hours using the charging case, the IPX5 water, and dust-proof certification, Bluetooth 5.0, 2 lithium-ion batteries, and much more. Learn how to use them with this new ZVOLTZ Pro Wireless Earbuds Manual.

ZVOLTZ Pro Wireless Earbuds Manual | Everything You Need To Know!

ZVOLTZ Pro Wireless Earbuds Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case, and the earbuds will turn on automatically. After that, a red light will start flashing and the voice prompt “Pairing” will appear, and the earbuds will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “ZVOLTZ”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case, and the earbuds will turn on automatically. After that, a red light will start flashing and the voice prompt “Pairing” will appear, and the earbuds will be ready to pair to any device.

Step 7: Select “ZVOLTZ”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

ZVOLTZ-Pro-Wireless-Earbuds-Manual-1

ZVOLTZ Pro Wireless Earbuds Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

ZVOLTZ Pro Wireless Earbuds Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for 3 to 4 seconds.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

ZVOLTZ-Pro-Wireless-Earbuds-Manual-2

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Play the previous song: Press the multifunction touch button on the right earbud three times.
  • Turn the volume up: Press the “+” volume touch button on any of the earbuds.
  • Turn the volume down: Press the “-” volume touch button on any of the earbuds.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 1 second.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.
ZVOLTZ-Pro-Wireless-Earbuds-Manual-3

ZVOLTZ Pro Wireless Earbuds Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the ZVOLTZ Pro Wireless Earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

ZVOLTZ Pro Wireless Earbuds Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

ZVOLTZ-Pro-Wireless-Earbuds-Manual-4

ZVOLTZ Pro Wireless Earbuds Manual | How to Reset?

Step 1: With the earbuds inside of the charging case, press and hold the multifunction touch button on both earbuds for 10 seconds, until all the lights on the charging case flash three times.

Step 2: Enter your device’s Bluetooth settings and forget the ZVOLTZ Pro Wireless Earbuds.

Step 3: After that, the resetting will be done.

ZVOLTZ Pro Wireless Earbuds Manual | LED Light Status

Charging case

  • One light on: Case has 1% to 25% of battery.
  • Two lights on: Case has 25% to 50% of battery.
  • Three lights on: Case has 50% to 75% of battery.
  • Four lights on: Case has 75% to 100% of battery.
  • All lights flashing three times: Earbuds resetting.
ZVOLTZ-Pro-Wireless-Earbuds-Manual-5

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

ZVOLTZ Pro Wireless Earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

ZVOLTZ-Pro-Wireless-Earbuds-Manual-6

FAQs

Are ZVOLTZ Pro Wireless Earbuds waterproof?

The ZVOLTZ Pro Wireless Earbuds have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle.

Does ZVOLTZ Pro Wireless Earbuds have a microphone?

Yes, the ZVOLTZ Pro Wireless Earbuds have integrated microphones.

Do ZVOLTZ Pro Wireless Earbuds have low latency/gaming mode?

No, the ZVOLTZ Pro Wireless Earbuds don’t have a low latency/gaming mode.

How to know when ZVOLTZ Pro Wireless Earbuds are fully charged?

The earbuds take about 3.5 hours to charge, so after that time, they should be fully charged.

Can ZVOLTZ Pro Wireless Earbuds connect to PC and Laptop?

Yes, the ZVOLTZ Pro Wireless Earbuds can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earphone from the above ZVOLTZ Pro Wireless Earbuds Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.