A6Z TWS Manual | Step-by-Step User Pairing and User Guide

In the world of wireless headphones, Apple’s AirPods and the Redmi Airdots are the most popular and because of that, a lot of companies have struggled to make copies of them, but with lower costs. Among these are the A6Z TWS, which were completely thought of by the Redmi ones. Here we will show you how to use them in this new A6Z TWS Manual.

A6Z TWS Manual: How to turn on or off the A6Z TWS?

• Turn on: The two A6Z TWS earbuds will automatically turn on and pair after removing them from the charging case.
• Turn off: In this case, you have two options: automatically turn off the earbuds by placing them back into their charging case.

1. If both earbuds are being used together, press and hold the touch panel on the master earbud (left earbud) for 4 seconds until you hear “power off”.
2. If only one earbud is being used, press and hold the touch panel on that earbud for 4 seconds, and then it will turn off.

A6Z TWS Manual: How to pair the A6Z TWS?

Bluetooth pairing

First, you have to place both earbuds in their case, and double click the touch panel of it to enter Bluetooth pairing. This will allow a connection to be started between the A6Z TWS.

NOTE: If no connection is made within 10 minutes of the earbuds being switched on, the earbuds will automatically switch off to save power.

Pairing both earbuds

The two earbuds have been connected to each other by factory, so you don’t need to pair them again. Also, it is worth mentioning that, in this case, the left earbud is the default master one.

1. Pick up both earbuds from the charging case, and then tear the stickers on them.
2. A few seconds later, the two earbuds will connect, and soon you may hear a voice prompt saying “left channel / right channel”.
3. Press and hold the touch panel of each earbud for 2 seconds at the same time to power them on. A few seconds later, the earbuds will be connected to each other. After this, the master one (left earbud) will enter the pairing mode, and blue and red lights will flash alternately so that later, the same happens with the right earbud.
4. Activate the Bluetooth function on your smart device to search for new devices, and look for “A6Z TWS” and select.
5. After that, you may hear a voice prompt saying “pairing successful/second device connected”.

NOTE: If the two earbuds connection fails, please turn off both earbuds and follow the next operation:

• Press and hold the touch panel of each earbud for 4 seconds simultaneously until blue and while lights flash alternately. A few seconds later, both earbuds will connect. After that, only the blue lights will flash two times every 2 seconds, and soon after that, you may hear a voice prompt saying “left channel / right channel”.
• When that happens, follow steps 3, 4, and 5 in the “Pairing both earbuds” section.

Pairing left earbud only

1. When the earbuds are off, press and hold the touch panel of the left earbud for 4 seconds until blue and while lights flash quickly, and soon after that, you may hear “pairing”.
2. Activate the Bluetooth function on your smart device to search for Bluetooth devices. Look for “A6Z TWS” in the device list display and select.
3. When a successful connection is made, a blue light will flash once every 7 seconds. The left earbud is now ready to use.

Pairing right earbud only

1. When the earbuds are off, press and hold the touch panel of the right earbud for 4 seconds until blue and while lights flash quickly, and soon after that, you may hear “pairing”.
2. Activate the Bluetooth function on your smart device to search for Bluetooth devices. Look for “A6Z TWS” in the device list display and select.
3. When a successful connection is made, a blue light will flash once every 7 seconds. The right earbud is now ready to use.

A6Z TWS Manual: How to use the A6Z TWS?

• To play, pause, and resume any song or video, you have to short press any of the earbud’s touch panels.
• To play the next song, you have to double press any of the earbud’s touch panel.
• To activate or stop the Siri function, you have to press and hold the touch panel on the master earbud for 1 second during standby mode/music playing.
• To answer or end a phone call, you have to short press any of the earbud’s touch panel.
• To reject an incoming call, you have to double press any of the earbud’s touch panel.
• During a call, to switch from the earbuds to the smartphone and vice versa, you have to double press any of the earbud’s touch panel.

A6Z TWS Manual: How to charge the A6Z TWS?

Charging the earbuds

These earbuds have an internal rechargeable battery. This battery must be fully charged before the first use, and the charging time is approximately 2 hours. The earbuds cannot be used while charging.

1. Place the earbuds on the charging case (tear the stickers on the earbuds first).
2. White lights will turn on the earbuds when the charging has begun.
3. Pick up the earbuds when they are completely charged from the charging case, and they will automatically turn on.

Charging the charging case

1. Plug the built-in USB cable to the charging case into an active computer USB port of USB AC adapter that is plugged into an active wall outlet.
2. A red light will flash to indicate that the charging has begun.
3. Once that is fully charged, a red light will always be on.

Warnings about the A6Z TWS

• To prevent any possible hearing damage, do not listen to high volume levels for long periods of time.
• Fully understand the user manual before use.
• Do not use any type of fast charger to charge the earbuds to avoid affecting batteries’ service life.
• If not used for long periods of time, please charge the earbuds with a lithium battery at least once per three months.
• Keep the earbuds away from humid places to avoid affecting the internal circuit.
• Do not put the product in places exposed to the sun or with high temperature. The high temperature will shorten the service life of any electronic components, damage the battery, and make plastic components deformed.
• Do not put the earbuds in cold places to avoid damaging the internal circuit board.
• Do not dismantle the earbuds. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate or strike the earbuds with hard objects to void damaging the internal circuit.
• Do not use drastic chemicals or cleaner to clean the earbuds.
• Do not use sharp objects to scratch the surface of the earbud to avoid damaging its shell.

We hope you now know how to operate the earphone from the above A6Z TWS Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.