Home Audiophile Earbuds Manuals The recently launched i12 TWS Airpods may be the most affordable alternative to the popular Apple AirPods so far. Adapt’s advanced True Wireless Stereo (TWS) technology that they have inside, in addition to having the left and right channels separately, are points that add power to this new product. But those who are using these Bluetooth headsets for the first time, should have no idea how they work, so the next question goes into the world: how to use the i12 TWS Airpods? Well, don’t worry, here is a special operating instruction on how to use these earphones, and we’ll show it to you in this i12 TWS Manual. If you are interested in purchasing them, these earbuds are available in the official Amazon store. What's Inside Togglei12 TWS Specs Sheeti12 TWS Accessoriesi12 TWS Manual | Guide & TroubleshootingHow To Turn On And Off?How To Pair The Earbuds?How To Control These Earbuds? – Stereo ModeHow To Activate The Mono Mode?How To Charge The Earbuds?What Do The Lights Mean?How To Wear These Earbuds?How To Reset And Re-Pair These Earbuds?How To Delete The Pairing Information?How To Change The Language? Do These Earbuds Have An App?Some Common Problems & TroubleshootingFAQs i12 TWS Specs Sheet Model i12 TWS Weight Earbuds: 4 grams each Waterproof/IP ratings IPX5 Bluetooth version V5.0 Range/Distance 15 to 25 meters Connectivity Port/ Charging Cable Type-C Audio Decoding AAC Speaker frequency response 20Hz – 20kHz Battery Life Earbuds: 5 hours Charging Time Earbuds: About 70 minutes App Support No Controls/Features Play and pause a song, play the next and previous song, voice assistant, turn the volume up and down Accessories Charging case, user manual, USB cable Price 10 USD i12 TWS Accessories The earbuds come with the following accessories: Charging case. User manual. USB cable. i12 TWS Manual | Guide & Troubleshooting How To Turn On And Off? Turn On Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Turn Off Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Manually: Press and hold the multifunction touch sensor on both earbuds for about a couple of seconds. How To Pair The Earbuds? To Android And iOS Devices Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other. When a red and blue/red light starts flashing in one of the earbuds, it means that they will be ready to pair with any device. Step 2: Unlock the desired device. Step 3: Go to the device’s settings. Step 4: Turn on Bluetooth on the desired device. Step 5: Search for a new device. Step 6: Select the i12 or TWS earbuds. If a password is needed, type “0000”. After that, the flashing light on the earbud will turn off, and the pairing will be done. To Windows (PC) Step 1: Turn on the Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other. When a red and blue/red light starts flashing in one of the earbuds, it means that they will be ready to pair with any device. Step 7: Select the i12 or TWS earbuds. If a password is needed, type “0000”. After that, the flashing light on the earbud will turn off, and the pairing will be done. How To Control These Earbuds? – Stereo Mode There are different i12 TWS Airpods available on the market. Since it’s not a registered name, it is used by different Chinese manufacturers. As a result, buyers have different touch control functions. Here are some models with different touch control functions: NOTE: The multifunction touch sensor is placed on the top outside part of the stem of the earbuds. Model 1 Play or pause a song: Press the multifunction touch sensor on any of the earbuds one time. Play the next song: While listening to music, press the multifunction touch sensor on the left earbud three times. Play the previous song: While listening to music, press the multifunction touch sensor on the right earbud three times. Turn the volume up: Press the multifunction touch sensor on the right earbud two times. Turn the volume down: Press the multifunction touch sensor on the left earbud two times. Answer an incoming call: Press the multifunction touch sensor on any of the earbuds one time. End a call: Press the multifunction touch sensor on any of the earbuds one time. Reject an incoming call: Press the multifunction touch sensor on any of the earbuds two times. Activate the voice assistant: Press and hold the multifunction touch sensor on any of the earbuds for about 3 seconds. Model 2 Play or pause a song: Press the multifunction touch sensor on any of the earbuds one time. Play the next song: While listening to music, press the multifunction touch sensor on the right earbud three times. Play the previous song: While listening to music, press the multifunction touch sensor on the left earbud three times. Turn the volume up: Press the multifunction touch sensor on the right earbud two times. Turn the volume down: Press the multifunction touch sensor on the left earbud two times. Answer an incoming call: Press the multifunction touch sensor on any of the earbuds one time. End a call: Press the multifunction touch sensor on any of the earbuds one time. Reject an incoming call: Press the multifunction touch sensor on any of the earbuds two times. Call the last contacted person: Press the multifunction touch sensor on any of the earbuds one time. Activate the voice assistant: Press and hold the multifunction touch sensor on any of the earbuds for about 3 seconds. Credits: eSavants How To Activate The Mono Mode? To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. How To Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically. Charging Case To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. What Do The Lights Mean? Earbuds A red and blue/red light flashing in one of the earbuds: The earbuds will be ready to pair with any device. Said blue light turns off: The earbuds are connected to the device. A red light on while on the charging case: The earbuds are charging. Said red light turns off while on the charging case: The earbuds are charging. A red light turns off and turns blue: The pairing information was deleted. A red light on for 1 second while resetting: The earbuds are resetting. Charging Case Model 1 A red light flashing while charging: The case is charging. A red light on while charging: The case is charging. The red light turns off while charging: The case is fully charged. A light turns on and off while resetting: The earbuds are resetting. Model 2 A red/green light flashes 1 time: The case has about 25% of battery. A red/green light flashes 2 times: The case has about 50% of battery. A red/green light flashes 3 times: The case has about 75% of battery. A red/green light flashes 4 times: The case has about 100% of battery. A light turns on and off while resetting: The earbuds are resetting. Credits: eSavants Credits: DenisTec How To Wear These Earbuds? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How To Reset And Re-Pair These Earbuds? NOTE: To ensure a good result, make sure that the earbuds are fully charged. Step 1: Go to the device’s settings. Step 2: Delete the i12 or TWS earbuds from the devices’ Bluetooth list. Step 3: Turn off Bluetooth on the device. Step 4: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other. When a red and blue/red light starts flashing in one of the earbuds, it means that they will be ready to pair with any device. Step 5: Press the multifunction touch sensor in one of the earbuds 5 times. A red light will be on for a second and then turn off. This will reset the earbud. Step 6: Press the multifunction touch sensor in the other earbud 5 times. A red light will be on for a second and then turn off. This will reset the earbud. Step 7: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Step 8: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other. When a red and blue/red light starts flashing in one of the earbuds, it means that they will be ready to pair with any device. Step 9: Turn on Bluetooth on the desired device. Step 10: Search for a new device. Step 11: Select the i12 or TWS earbuds. If a password is needed, type “0000”. After that, the flashing light on the earbud will turn off, and the pairing will be done. How To Delete The Pairing Information? In case the paired information needs to be deleted, it is done as follows: Model 1 In pairing mode, press the multifunction touch sensor for a couple of seconds, until the LED light turns red. Model 2 Step 1: Go to the device’s settings. Step 2: Delete the i12 or TWS earbuds from the devices’ Bluetooth list. Step 4: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Step 5: Press the button on the back of the charging case two times. This will reset the earbuds, and a light on the case will turn on and off. Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other. When a red and blue/red light starts flashing in one of the earbuds, it means that they will be ready to pair with any device. Step 7: Select the i12 or TWS earbuds. If a password is needed, type “0000”. After that, the flashing light on the earbud will turn off, and the pairing will be done. How To Change The Language? Step 1: Make sure that the charging case and the earbuds have battery. Step 2: Go to the device’s settings. Step 3: Delete the i12 or TWS earbuds from the devices’ Bluetooth list. Step 4: One the lid of the charging case and take one of the earbuds. Step 5: After a few seconds, press the multifunction touch sensor 4 times. Step 6: Place the earbud into the charging case. Step 7: Repeat the process with the other earbud. Since the i12 TWS Airpods aren’t the same earphone for everyone (it has different models and different manufacturers), the instructions will be different for every model. The above process is the same, you just have to press 5 times or 6 times frequently to change the language. In other words, just keep pressing until to hear the language you want. Do These Earbuds Have An App? Sadly, these earbuds don’t have an app support. Some Common Problems & Troubleshooting Left / Right / One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: Try charging the earbud that is not working or both, placing them in the charging case. Try factory resetting the earbuds. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. Try resetting the earbuds. FAQs Are the Noise Buds VS102 Neo waterproof? No, the Noise Buds VS102 Neo are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle. Do the Noise Buds VS102 Neo have a microphone? Yes, the earbuds come with integrated microphones. Do the Noise Buds VS102 Neo have a low latency/gaming mode? Yes, these earbuds have a low latency/gaming mode. Can the Noise Buds VS102 Neo connect to PCs and laptops? Yes, these earbuds can connect to PCs and laptops. Are the Noise Buds VS102 Neo noise-canceling? No, these earbuds don’t come with noise-cancellation technology.